KRISTOF – AT1130

KRISTOF – AT1130

– glazing: ornament
– RAL 3004
– Handle C10 carbon 800 mm

EXACT CONFIGURATOR

<-- The EXACT CONFIGURATOR allows you to change the appearance and dimensions of the door. There are eight types of structures to choose from with different configurations of the side and top skylights. You can change dimensions, paint colors, types of glass, handles, handles, hinges, types of gears and ways to control them.
After setting all the parameters, we get a perfectly proportional visualization of our doors from the outside and inside.
We can save the obtained door configuration in a PDF file, print it or send it to us to get information about the implementation costs.

Gallery

PRODUCT PROPERTIES

THERMO-ALU STANDARD DOOR

The THERMO-ALU STANDARD series is an increased thermal insulation product (Ud = 0.6 to 0.9 W/(m2K),
produced on the basis of ALUPROF MB-79N, MB-86 and MB-104 PASSIVE systems with attachment panels.

The characteristic feature of this series is its restrained styling.
Panes are mounted in the leaf without any additional decorative appliques.

The door can be expanded with the help of additional lateral and upper transoms with any kind of
pane or with decor-matt sand-blasted glass with a pattern matching the pattern of the door leaf.

FUHR multi-point locks are used for locking, in many locking and control configurations.
Hinges: choice of wing or roller hinges (WALA) and concealed hinges (AXXENT).
Glazing in the door leaf: Four-pane package of Ug = 0.5 W/(m2*K).
Thickness of polyurethane foam in the leaf: 70 - 95 mm.

In order to increase the resistance to break-ins we offer in addition:
- 6D-C class inserts,
- anti-burglary protection of hinges,
- P4A class panes.

ADDITIONAL OPTIONS

Multi-point locks

Hinges

Door handles, lock inserts, knobs

Pull handle

Access control

Door closers

COLOURS

Colours

Aluminium doors are painted entirely with powder coatings of semi-matt surface according to RAL colour chart.

There are also special structural surface coatings in several variations to choose from:
– fine structure without metallic inclusions.
– structure with metallic effect.
– structure with metallic effect, plain matt.

The doors can also be powder-coated with DECORAL coatings, which imitate various decorative coats, including wood grains.

The charts of structural surfaces and DECORAL coatings are available at the manufacturer’s and from sales representatives.

Fine structure without metallic inclusions

DS-7016

DS-7024

DS-7045

DS-9005

Structure with metallic effect

581 TE 71319 A10

581 TE 71386 A10

581 TE 90070 A10

581 TE 71382 A10

581 TE 90060 A10

Structure with metallic effect, plain matt

580 3E 71319 A10

580 3E 71386 A10

580 3E 90070 A10

580 3E 71382 A10

580 3E 90060 A10

WINDOWPANES

GLAZING

Standard:
- door leaf: 4-pane package 66 mm, MasterCarre ornament with low-emission panes (4/16/4/18/4/16/4), Ug=0.5 W/(m2*K).
- additional transoms: 3-pane package 48 mm, MasterCarre ornament with low-emission panes (4/18/4/18/4), Ug=0.5 W/(m2*K).
In both cases "warm" glass pane spacers were used, which improves the heat transfer coefficient of the door.

Moreover, depending on the requirements, there is a wide range of special panes to choose from:
- anti-sun (dyed in the mass and reflective),
- safe and protective (laminated or tempered),
- Texture Glass,
- dekormat (sand-blasted patterns on one of the panes).
All possible combinations of these panes are available in our offer.

TEXTURE GLASS:

Master Carre

Master Point

Kura

Altdeutsch-k

Silvit

Chinchilla

Mat

DEKORMAT PANES

In the process of glass matting with the use of strong stream of sand we obtain the effect of translucent motive (dark fragments on the pane).
The opposite effect can also be obtained, i.e. the pattern is matted and the rest of the pane is translucent.
We can make a sand-blasted pane according to the design provided by the customer.