BUSH – ATCR1010
– RAL 7016
– Handle: C10 carbon 1200mm
– applique: CORRODE
THERMO-ALU CORRODE DOOR
The THERMO-ALU CORRODE series is an increased thermal insulation product (Ud = 0.5 do 1,0 W/(m2*K),
produced on the basis of ALUPROF MB-70, MB-86 and MB-104 PASSIVE systems with attachment panels.
The characteristic feature of this series is an independent overlay made of corroded Corten steel, mounted on the outside of the door leaf.
It is a steel grade characterized by high resistance to weather conditions.
Under an actual layer of rust, Corten steel forms a dense layer of phosphates or sulfates. This barrier protects the surface from further corrosion.
The creation of an attractive surface from rust begins in two weeks and ends after about a year and a half to three years.
The color of rust is initially light brown, but it gets darker over time.
In this process, it is important that the surface should dry out after wet periods.
If the steel is exposed to permanent moisture, the protective layer is not effective and Corten steel rusts just like normal steel.
Depending on weather and environmental conditions, different rust colors are formed on the surface, even on identical parts of the material. This is not a defect, but an advantage and therefore does not entitle to complaints.
Note - The first formed layer of rust is not permanent and may therefore leave rust marks on adjacent building materials.
The door can be expanded with the help of additional lateral and upper transoms with any kind of pane or with decor-matt sand-blasted glass with a pattern matching the pattern of the door leaf.
FUHR multi-point locks are used for locking, in many locking and control configurations.
Hinges: choice of wing or roller hinges (WALA) and concealed hinges (AXXENT).
Glazing in the door leaf: none.
Thickness of polyurethane foam in the leaf: 70 - 90 mm.
In order to increase the resistance to break-ins we offer in addition:
- 6D-C class inserts,
- anti-burglary protection of hinges,
- P4A class panes.
Door handles, lock inserts, knobs
Aluminium doors are painted entirely with powder coatings of semi-matt surface according to RAL colour chart.
There are also special structural surface coatings in several variations to choose from:
– fine structure without metallic inclusions.
– structure with metallic effect.
– structure with metallic effect, plain matt.
– structure with 3D effect.
The doors can also be powder-coated with DECORAL coatings, which imitate various decorative coats, including wood grains.
The charts of structural surfaces and DECORAL coatings are available at the manufacturer’s and from sales representatives.
Fine structure without metallic inclusions
Structure with metallic effect
581 TE 71319 A10
581 TE 71386 A10
581 TE 90070 A10
581 TE 71382 A10
581 TE 90060 A10
Structure with metallic effect, plain matt
580 3E 71319 A10
580 3E 71386 A10
580 3E 90070 A10
580 3E 71382 A10
580 3E 90060 A10
- door leaf and upper panel: none.
- additional transoms: 3-pane package 48 mm, MasterCarre ornament with low-emission panes (4/18/4/18/4), Ug=0.5 W/(m2*K).
In both cases "warm" glass pane spacers were used, which improves the heat transfer coefficient of the door.
Moreover, depending on the requirements, there is a wide range of special panes to choose from:
- anti-sun (dyed in the mass and reflective),
- safe and protective (laminated or tempered),
- texture glass,
- dekormat (sand-blasted patterns on one of the panes).
All possible combinations of these panes are available in our offer.
In the process of glass matting with the use of strong stream of sand we obtain the effect of translucent motive (dark fragments on the pane).
The opposite effect can also be obtained, i.e. the pattern is matted and the rest of the pane is translucent.
We can make a sand-blasted pane according to the design provided by the customer.